{tab Product description}
Emotiv EPOC Flex Gel Sensor Set
Our EPOC Flex Gel Kit contains all the features of a traditional EEG system, with the exciting addition of portability. It includes silver silver-chloride sensor tips, conductive gel and wires that connect to a compact control box fitted to the cap, enabling completely mobile and contextual EEG data acquisition. Select your cap size at purchase and configure your sensor positions in the laboratory to suit your needs (initial set up time approximately 20-30 minutes).
The Kit includes
- EPOC Flex Control Box with USB charging cable
- Universal USB Receiver for wireless transmission (BTLE not supported)
- EPOC Flex Cap choose from 54cm, 56cm or 58cm
- EPOC Flex gel Sensors 34 sintered silver-silver chloride gel sensors + compatible ear clips
High density
EPOC Flex is a wireless control box that works alongside the EasyCap system. Record from any of the standard 10-20 EEG positions for up to 32 channels.
Maximum flexibility
Choose from different cap sizes to accommodate a wide range of head sizes and support awake or sleep studies with two control box positions.
Professional mobile EEG
EPOC Flex transmits data wirelessly at 128 Hz, so you can record high resolution brain data without being tethered to a computer.
Saline or gel
Flex Saline features EPOC+ felt based sensors that can be hydrated on or off the head. Traditional gel sensors offer the highest signal quality.
EmotivPRO fully supports EPOC Flex!
- Electrode configuration map - Create and save your headset sensor configurations under the 10-20 EEG standard
- Raw EEG - View all 32 channels simultaneously in live mode and playback or select a subset of channels
- Data analysis - Run a frequency analysis inside the app or export your data for further analysis.
{tab Function}
GET STARTED WITH OUR EPOC FLEX KIT
Our EPOC Flex Kits give you everything you need to start doing high density wireless EEG. The kit offers you the flexibility to choose your type of sensors (saline or gel) and choose between cap sizes at purchase. You can configure your sensor positions in the lab to suit your needs (initial set up time approximately 15-30 minutes)
- Control box - plus wireless Universal USB Receiver and USB charging cable
- Flex cap - choose one of three sizes to suit your needs
- Gel or saline sensors - Saline: 34 Saline soaked felt pads or Gel: 34 silver-silver chloride sensors
{tab Features}
EEG support
- Up to 32 channels: configurable
- 2 references: CMS/DRL configurable in any 10-20 location or on ears (compatible ear clips for sensors included)
- Available data: raw EEG and frequency band data. Requires PRO License for use.
EEG signals
- Sampling method: Sequential sampling, single ADC
- Sampling rate: 1024 internal downsampled to 128 SPS.
- Resolution: 14 bits with 1 LSB = 0.51µV (16 bit ADC, 2 bits instrumental noise floor discarded), compressed maximum slew rate 32uV per sample.
- Bandwidth: 0.16 ? 43Hz, digital notch filters at 50Hz and 60Hz
- Dynamic range (input referred): 8400 µV(pp)
- Coupling mode: AC coupled
EEG sensors
- Electrode count: 34 recording electrodes
- Sensor material: sintered silver-silver chloride, compatible with gel
- Size: Profile height_ 3.5 mm; Central opening diameter: 6 mm
- Wire length: 36 cm
- Manufacturer: EasyCap
Cap
- Available sizes: 54 cm, 56 cm, 58 cm. Learn more about choosing a cap size.
- Openings: 72 in the standard 10-20 positions
- Pockets for control box: At approximately Iz (for awake studies) and Cz (for sleep studies).
- Manufacturer: EasyCap
Motion sensors*
- IMU part: ICM-20948
- Quaternions: normalized, 4D
- Accelerometer: 3-axis +/-8g
- Magnetometer: 3-axis +/112 gauss
* Software support for motion data coming soon.
Connectivity
- Proprietary USB receiver (included): 2.4GHz band
- Micro USB cable (included): for charging
Supported platforms
- Windows: 7,8,10; 8GB RAM; 500MB available disk space
- MAC: OS 10.10 or above; 8GB RAM; 500MB available disk space
Power
- Battery: Internal Lithium Polymer battery 640mAh
- Battery life: up to 9 hours
{/tabs}
