RSP Wall GO training device for the upper body

RSP Wall GO training device for the upper body

Free Delivery from €100 (EU)
Trusted Shop Warranty Certified Partner

Worldwide Shipping
Secure Shopping with secure SSL connection

SKU: 1892

Manufacturer: RSP Inercial Performance

MPN: RSPW10

EAN: 4260497572770

Category: All products

Available immediately
Ships within: 1 - 2 business days (DE - int. shipments may differ)

£ 960,75

incl. 19% VAT ,

Choose tax zone / country of delivery

With the RSP Wall Go training device for the upper body, you can achieve a targeted improvement in the ability to restrain and brake during pulling and pushing actions of the upper body. The targeted movements mean that even those with little experience in intertial training can benefit from the RSP Wall Go.

pcs

RSP Wall Go - your training device for the upper body.

Our machine with fixed radius is for the training the actions of braking and pushing the upper body

Fixed radius machines have the particularity that the axis is the same during the whole stroke, so all the variations in the acceleration of the machine depend on the capacity of the sportsman to apply force in that movement.
They have a more structural orientation at a muscular level as they work slower than a conic pulley machine and allow for more time of tension as they have a lower acceleration and therefore slower movements. To emphasize on this fundamental characteristic in the fixed radius machines is by using the 1×2 transmission that requires the athlete to apply more force and to increase the time of tension during the entire path of the movement.
The less accelerated movements makes it easier at a technical level for people with little experience in inertial training, making this machine a great tool for the non- sporting population to benefit from inertial training.

How to use the RSP Wall Go?

With this machine you will be able to perform all the movements related to the actions of pulling and pushing of the upper body to make these gestures as effective as possible. It is very important to adjust the run of the rope with the movement we want to train, so that the end of the concentric phase (farthest point) coincides with the limit of the rope to keep it always tense and avoid losing tension. To adjust it , either we move closer or further away until we find this point or we adjust the rope with the lenght adjuster.
We must also emphasize the importance of making this adjustment in the body position in which we want to make this movement since all the stabilizing muscles and the lower body will be decisive, acting as fixers to be able to apply force and improve the performance in these movements.

Product Type:	Exercise and workout equipment Sport
Applications:	Fitness Research Pro Sports Therapy weight loss control
Target Groups:	Professional Therapist Athletes Advanced Users

How to adjust the RSP Wall Go?

Fixed radius machines have only one way to vary the load of the machine and therefore the response of the machine is the same as to the force applied by the athlete:

Varying the Moment of inertia: the moment of inertia is defined as the minimum value of force that the athlete has to apply to vary the machine’s state of rest, this means that the higher this value is, the more force the athlete has to apply to start and stop the machine, and the more time he will need to stop the machine and start it again (slower the Eccentric/ Concentric transition)

This will mean that as we increase the value of inertia, we will increase the time of tension and the value of force that the athlete can apply by making the movement slower.

Standard equipment:

RSP wall chassis
2 eyebolts to vary the height of the ropes´ output
1 eyebolt for a vertical shot of the rope
4 aluminium masses
Harken Carbo pulley of 29mm Ø in the chassis
2 Harken Carbo pulleys of 40mm Ø for a 1×2 transmission
4 meters high performance rope with lenght adjuster
Hand grip
Wall mounting kit
Assembly manual

Technical specifications:

Designed to improve the capacity of acceleration and brake in the actions of pulling and pushing of the upper body
1x2 transmission that allows to increase the tension during the performance of the movement
Adjustment of the Moment of inertia through the masses integrated in the disc,each mass represents a 10% of the Moment of inertia
Height adjustment on the ropes´ output
Possibility of having a vertical shot of the rope

Size: 28 x 30 x 30 cm

Weight: 5,5 kg

Spare parts:

Chassis pulley

Pulley for a 1×2 transmission

Rope (4 meters)

Moments of inertia:

Without masses: 184,44 kg / cm²
2 masses: 221,32 kg / cm²
4 masses: 258,22 kg / cm²

Accessories:

High load pulleys (high performance at high working densities)

Short carbon bar

Portability kit (to fix the machine to a solid structure such as goal, trellis, column..

There are no reviews yet.

Customers will be sent a link to rate the products. This is a personalized link only given to consumers who have actually purchased the goods or services from us.

pcs

RSP Wall GO training device for the upper body

£ 960,75 *

Available immediately
Ships within: 1 - 2 business days (DE - int. shipments may differ)