{tab Product description}
U-GYM mini: Deep Tissue Massager for Relaxation
UGYM`s proprietary digital massage technology gives you professional massage as if getting that from therapist and can fully relax your muscle
Through UGYM mini`s deep tissue massage, the deeper muscle will contract passively to improve blood circulation and metabolize chemical waste within these areas. Thus it can effectively relieve any discomfort from muscle stiffness or pain. UGYM mini`s medium frequency is between 2000-4000HZ and can get into deep tissue to stimulate meridians and nerve, letting users get a feeling of deep pressed sensation, which is similar to acupressure from massage therapist. Most TENS and EMS are using low frequency (below 1000HZ), which can only reach skin deep areas and cannot effectively stimulate deep tissue for effective muscle contraction.
{youtube}XfyODLCTp7M{/youtube}
Benefits:
- Deep tissue massage, just like you'd get from a massage therapist
- Great design by a former Under Armor designer: it?s slick and fashionable
- Smart device: customize and share massage programs using your smartphone (BLE connectivity is not available for this current version)
- Ultra portable: use it at work, at home, indoors, outdoors, anytime, anywhere
- Easy-to-use and ergonomic: it's designed for everyone
{tab Function}
How to use the UGYM mini
- Please clean the skin using water and keep it dry; lift up pad (electrode) from rounded ear side off the clear plastic cover and place the pad to the treated area. Keep the pad flat on skin and avoid any wrinkle for better effect.
- There are two stimulation modes to choose from. Select the desired mode and press + or - to change the intensity level. Slowly increase the intensity level and keep intensity bearable and comfortable. (Double press ON to switch mode)
- The stimulation mode is set to end automatically in 30 minutes. The timer and intensity level will reset if the mode has been switched.
- UGYM mini will shut off automatically in 60 seconds if no further action is followed.
- Please do not remove the pad from skin until the intensity level is switched to the lowest level or device is turned off.
- Stimulation cannot be activated for battery lower than 10% and device cannot turn on if battery is lower than 5%.
U-GYM simulates deep massage technique from real therapist to give you full relaxation!
Massage Sequence 1:
Using different level and frequency of stimulation pulses alternating repeatedly to produce gentle, solid but deep pressing muscle sensation. It can effectively relieve muscle fatigue and soreness and help release your mental pressure.
Massage Sequence 2:
Alternating gentle and strong beat motion pulses can effectively relieve muscle stiffness caused by static posture. It can improve blood circulation and metabolism to speed up muscle recovery.
{tab App}
Use U-GYM Smart Massage app
1. Download and Install app
Just use keyword "UGYM" in app store and you should find UGYM logo. Please download and install the app in your smartphone.
2. Activate the app
Once you open the app you will see the login screen (right). You can either use Facebook login or Airsig login. When using Facebook to login, make sure the Facebook account is already login, the app will take you to Facebook login page and select "Use Facebook to Login" and click "Confirm" to continue. The app now will take you to the main page. (Note that if you are inactive for 5 minutes, you will be logged out.) When using Airsig to login the first time, the prompt will lead you to setup a signature. Please think of a name at least 6 characters such as "Franky", picture that word in your head and keep your thumb on the screen and hold the phone like a wand to write the word as if you are writing on the wall with the tip edge of your phone. Once it`s setup, it will take you to the main page. (Note that if you are inactive for 5 minutes, you will be logged out.)
3. Pair and control device
You will need to pair the device to update the firmware or control the device. Press the upper left corner and click on "Settings" and click on UGYM Paring. Now you see a device turned on named "U-Gym 075DBC", click on the name and you can set a nickname for it. Now the device is paired successfully. You can click on "System Update" to see if there`s any available firmware to update your device.
Now click on "Mode" to go back to the main screen. Click on one of the M1 - M4 modes and the screen will change to below. Press "+" to go up higher intensity and "-" to go down. You can see the remaining time left on the lower bar.4. Download additional massage modes
Press the upper right corner and select "Download Available Modes" and you will see UGYM005 to UGYM011 show up in the Available Mode section. If you select one of the available modes download from our server, you can replace M1 to M4 mode on the device. If you don`t like the change, you can restore the default M1-M4 back on device as well.
5. Create self-define mode
Before using the Self-define mode, please make sure you click on upper corner to select "Sync Available Cycles" and you will see different cycles pops up. Click on any of the cycles and they will show up in the row of sequence. Click on "Experience" and intensity to try your design. (Make sure your pads are already on your body and cord is plugged in to the device). If the design is complete, press "Save" and give the mode a name. Now you can see there`s additional mode on the bottom of main page.
6. Upload and share self-define mode
Click on one of the Self-design mode and you can delete or share the mode on Facebook.
{tab Features}
Features:
- Dimensions (LxWxH): 80mm x 60mm x 22mm
- Weight: 120g
- Packaging Size/Weight: 135mm x 130mm x 52mm/ 320g
- Lithium battery: Embedded
- Battery Capacity: 2600mAh
- Battery life: Up to 5 hours
- Frequency: 4000-8000Hz
- App Control: Yes
- Water Repellent: Yes
- Power Abnk: N/A
- Stripe Hole: Yes
Massage Sequence:
LED Display:Yes
{/tabs}
| Shipping weight: | 0,40 Kg |
| Product weight: | 0,40 Kg |
