AND Wireless Wrist Blood Pressure Monitor UB-1100BLE

A&D Wireless Wrist Blood Pressure Monitor UB-1100BLE

The UB-1100BLE from A&D is a lightweight, wireless wrist blood pressure monitor that is characterised by its ease of use and accuracy. It has features that facilitate accurate measurement and is suitable for up to 5 users plus 1 guest. Readings can be stored and shared in the A&D Connect app. This device is part of the A&D family of devices aimed at enabling patient management at home.

Advantages:

• Lightweight and compact, ideal for travelling
• Easy to use, both via the app and directly on the device
• Storage space for multiple users and guests
• Stores up to 100 measurements in the internal Memory
• Indicators for irregular heartbeat, cuff fit error and motion error
• Compatible with the A&D Connect app for easy data management and sharing

Note: It is important to read the user manual carefully before first use. The device is intended to monitor blood pressure and is not a substitute for diagnosis or treatment by a physician. A specialist should always be consulted if you have any health questions or concerns.
 

Scope of delivery:

• A&D Wireless Wrist Blood Pressure Monitor UB-1100BLE
• Operating instructions
• Charging cable (KSUSB-2C)

Optional accessories Power supply unit: AX-TB283

• Type: UB-1100BLE
• Measurement method: Oscillometric measurement
• Measurement range: Pressure: 0 - 299 mmHg
  Systolic pressure: 60 - 279 mmHg
  DiastolicDiastolic pressure: 40 - 200 mmHg
  Pulse: 40 - 180 beats / min
• Measurement accuracyPressure: ±3 mmHg
  Pulse: ±5 %
• Wrist circumference: 13.5 cm - 21.5 cmPower supply3.7 V Li-ion 325 mAh
• Number of measurements: Approx. 100 times (With pressure value 170 mmHg, room temperature 23 °C)
• Classification: Internally powered ME equipment (Supplied by batteries)
  Class II(Supplied by adapter)
  Continuous Operation mode
• Clinical test: According to ISO81060-2
• Wireless communication: ZY (MURATA Manufacturing Co. Ltd.)
  Bluetooth® Ver.4.1 Low Energy
  Technology BLP Frequency band: 2402 MHz to 2480 MHz
  Maximum RF output power: 2.1 dBm
• Operating conditions: +10 °C to +40 °C/15 %RH to 85 %RH/800 hPa to 1060 hPa
• Compact and Comfortable
• Start From App or Device
• Smart Connect
• Multi User(5 users +1 Guest)
• Stores 100 measurements in Internal Memory
• Irregular HeartBeat(IHB) Indicator
• Cuff Fit Error Indicator
• Movement Error Indicator

Commissioning and instructions for use for the A&D Wireless Upper Arm Blood Pressure Monitor

The A&D Wireless Upper Arm Blood Pressure Monitor is a user-friendly and accurate device for daily blood pressure monitoring. Before using it for the first time, it is important that the user reads the operating instructions carefully.

Connection with the Smartphone:

1. The user downloads the A&D app and starts the measurements via the app.
2. The blood pressure monitor displays the name and the measurement results
3. The measured data is transmitted to the app.

Correct measurement for accurate blood pressure readings:

• The user sits down comfortably, places the arm on the table without crossing the legs. Feet flat on the floor, back straight.
• It is recommended to relax for about 5-10 minutes before the measurement.
• The centre of the cuff should be held at heart level. The user should remain calm during the measurement.
• Measurements should not be taken immediately after physical exertion or a bath.
• For comparable measurement results, it is recommended to measure the blood pressure at the same time every day.

Note: The device is intended to monitor blood pressure and is not a substitute for diagnosis or treatment by a doctor. A specialist should always be consulted if you have any health questions or concerns.